Binder Circular Connector 3D CAD Models
Provider:Binder
Binder serves 3D CAD models for industrial and medical circular connectors by part number via PARTcommunity, TraceParts and its product-page CAD downloads, for machine and device twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of M9/M12/M16/M23 circular connectors, panel-mount and cable assemblies; PARTcommunity, TraceParts and the product-page CAD downloads serve 3D CAD models by part number. (The part-number lookup and STEP download across PARTcommunity/TraceParts and the product-page CAD downloads follow Binder’s official CAD-portal structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
- License
- Proprietary but free — 3D CAD data are free for product design; the intellectual property belongs to Binder and may not be redistributed or used outside design. CAD downloads include a human-verification step and some data require registration; the models are exterior geometry, and current rating and ingress protection must come from the official technical datasheets.
- Access
- Sign-up / registration
- Formats
- step · iges · other · dict
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
Binder is a German specialist in circular connectors for industrial, medical and sensor applications. For a machine or device twin, its connector geometry is what the mechanical model needs, served from the vendor’s own CAD portals.
Readiness assessment
Binder serves 3D CAD models per connector part number through PARTcommunity, TraceParts and its product-page CAD downloads, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are connector housing geometry; they carry no material parameters for EM or thermal simulation, and current/contact ratings must come from the datasheet.
Practical notes
Open the Binder CAD download on the product page or the PARTcommunity/TraceParts portal, pick the series, then download the STEP model for the specific part number. For a device layout, match the panel cut-out with the mechanical model. Current and contact ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.