Eaton Power Distribution 3D STEP Models & ECAD Macros
Provider:Eaton
Eaton serves 3D STEP models and ECAD macros for breakers, UPS and enclosures via its eCAD/mCAD/EPLAN portal and PARTcommunity, for power twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of breakers, UPS, power connectors and enclosure systems; the eCAD/mCAD/EPLAN portal and PARTcommunity serve 3D STEP models and ECAD/EPLAN macros by product or order number. (The order-number lookup and STEP plus EPLAN macro download on the eCAD/mCAD/EPLAN portal follow Eaton’s official tool-portal structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
- License
- Proprietary but free — 3D CAD and EPLAN macros are free for product design; the intellectual property belongs to Eaton and may not be redistributed or used outside design. The models are exterior geometry; current and breaking ratings must come from the official technical datasheets.
- Access
- Open
- Formats
- step · iges · other · dict
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
Eaton builds the power-distribution and circuit-protection layer of data centers, vehicles and industry — breakers, UPS, connectors and enclosures. For a power twin, its geometry and ECAD/MCAD data let the electrical and mechanical models share one source, served from the vendor’s own tool portal.
Readiness assessment
Eaton’s eCAD/mCAD/EPLAN data portal and PARTcommunity provide 3D STEP models and ECAD macros per product, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are component and enclosure geometry; they carry no material parameters for EM or thermal simulation, and ratings must come from the datasheet.
Practical notes
Open the eCAD/mCAD/EPLAN portal, search by product or order number, then download the STEP model or the EPLAN macro. For a panel layout, import the STEP body and place it on the rail. Current and breaking ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.