Rigid-body ready Industrial digital twin Proprietary but free Open

LAPP Cable & Connector 3D CAD Model Library

Provider:LAPP

LAPP serves STEP 3D models for EPIC connectors, SKINTOP glands and SILVYN conduits via its PARTcommunity portal, for cabling and machine twins.

Get it from the source →

At a glance

Readiness
L1 · Rigid-body ready
Rationale
Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
Scale
Covers the full line of EPIC rectangular and circular connectors, SKINTOP cable glands, SILVYN cable-protection conduits and ÖLFLEX cable accessories; the PARTcommunity portal serves 3D CAD models per catalog number in STEP and other neutral formats, with EPLAN data on selected channels. (The catalog-number lookup and STEP download on the PARTcommunity portal follow LAPP’s official CAD-portal entry structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
License
Proprietary but free — 3D CAD and EPLAN data are free for product design; the intellectual property belongs to LAPP and may not be redistributed or used outside design. The models are exterior geometry; current rating, sealing class and conductor cross-section must come from the official technical datasheets.
Access
Open
Formats
step · iges · other · dict
Runtimes
other
Physics properties
Collision geometryMass / inertiaElectrical
Domain
Electromagnetics / Power · Solid / Structure
Published
2026-11-01
Updated
2026-11-06

Why it is listed

LAPP is a leading supplier of cables, cable glands and industrial connectors (EPIC rectangular, SKINTOP glands, SILVYN conduits). For a cabling or machine twin, its geometry — connector housings, glands and conduit routes — is what the mechanical model needs, and it is served from the vendor’s own PARTcommunity portal rather than a generic repository.

Readiness assessment

The PARTcommunity portal serves 3D CAD models per catalog number in STEP and other neutral formats, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are exterior housing and routing geometry; they carry no material parameters for EM or thermal simulation, and current/voltage ratings must come from the datasheet.

Practical notes

Open the LAPP manufacturer page on PARTcommunity, pick the series, then download the STEP model for the specific size. For cable assemblies, model the connector and gland separately and join them in the CAD tree. Mating and sealing dimensions, plus the cable’s current rating, are in the product drawing, not the mesh.

Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.

License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.