Rittal Enclosure System 3D CAD Models (RiCAD 3D)
Provider:Rittal
Rittal serves 3D STEP models for enclosures, rails and cooling units via RiCAD 3D, PARTcommunity and the TS 8 configurator, for cabinet and data-center twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of TS 8/AX enclosures, rails, climate control and power-distribution modules; RiCAD 3D, PARTcommunity and the TS 8 CAD configurator serve 3D STEP models per component and can export assemblies. (The component lookup and STEP export across RiCAD 3D, PARTcommunity and the TS 8 configurator follow Rittal’s official CAD-portal structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
- License
- Proprietary but free — 3D CAD data are free for product design; the intellectual property belongs to Rittal and may not be redistributed or used outside design. The models are exterior geometry; load capacity and airflow ratings must come from the official technical datasheets.
- Access
- Open
- Formats
- step · iges · other · dict
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
Rittal is the enclosure and climate-control backbone of industrial cabinets worldwide. For a cabinet or data-center twin, its enclosure, rail and cooling geometry is the structural skeleton the rest of the bill of materials hangs on, served from the vendor’s own CAD portals.
Readiness assessment
Rittal’s RiCAD 3D library, PARTcommunity models and the TS 8 CAD configurator provide 3D STEP models per component, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are enclosure, rail and cooling geometry; they carry no material parameters for EM or thermal simulation, and load/ventilation ratings must come from the datasheet.
Practical notes
Use the TS 8 CAD configurator to lay out the enclosure, rails and cooling units, then export the STEP assembly. Alternatively pull individual parts from RiCAD 3D or PARTcommunity. Load capacity and airflow ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.