Rigid-body ready Industrial digital twin Proprietary but free Sign-up / registration

Yazaki Automotive Harness Connector 3D Model Library

Provider:Yazaki

Yazaki serves 3D models for automotive connectors and terminals by part number via its Component Catalog, for vehicle and harness twins.

Get it from the source →

At a glance

Readiness
L1 · Rigid-body ready
Rationale
Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
Scale
Covers the full line of automotive connectors, terminals, harnesses and inserts; the Component Catalog serves 3D connector and terminal models by part number. (The part-number lookup and 3D model download in the Component Catalog follow Yazaki’s official catalog structure; no single-vendor model count is published, so coverage is stated by product line and catalog. Checked 2026-11-01.)
License
Proprietary but free — 3D CAD data are free for product design; the intellectual property belongs to Yazaki and may not be redistributed or used outside design. Searching the catalog and some downloads require a registered account; the models are exterior geometry, and current rating and contact resistance must come from the official technical datasheets.
Access
Sign-up / registration
Formats
step · iges · other · dict
Runtimes
other
Physics properties
Collision geometryMass / inertiaElectrical
Domain
Electromagnetics / Power · Solid / Structure
Published
2026-11-01
Updated
2026-11-06

Why it is listed

Yazaki is one of the largest automotive wiring-harness and connector makers in the world. For a vehicle or harness twin, its connector and terminal geometry is what the 3D routing model needs, and it is served from the vendor’s own component catalog.

Readiness assessment

Yazaki’s Component Catalog serves 3D connector and terminal models per part number, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are connector and terminal geometry; they carry no material parameters for EM or thermal simulation, and current/contact ratings must come from the datasheet.

Practical notes

Open the Component Catalog, search by part number, then download the 3D model for the specific connector or terminal. For a harness layout, model the connector body at each end and route the bundle between them. Current and contact ratings are in the product drawing, not the mesh.

Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.

License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.